home header

DIGI 3

2 or 3 zone universal controller

DIGI3 Product Page

Number of Zones    HP or Gas/Elec    Wire Configuration    Damper Configuration    Capacity Control    Stages   
2 - 3 Universal Home run 2 Position Round or Rectangular (.5" SP) Yes 2H/1C Compatible With Most Wifi Enabled Thermostats   

An economical single stage auto changeover zone controller with a leaving air temperature sensor perfect for Residential New Construction or smaller zoning systems

DIGI 4

2 – 4 zone universal controller

DIGI4 Product Page

Number of Zones    HP or Gas/Elec    Wire Configuration    Damper Configuration    Capacity Control    Stages   
2 - 4 Universal Home run 2 Position Round or Rectangular (.5" SP) Yes 3H/2C Compatible With Most Wifi Enabled Thermostats   

An economical auto changeover 2 – 4 zone single or two stage controller perfect for residential applications or smaller commercial zoning systems

GEN II-R

2 – 10 zone universal controller

GEN II-R Product Page

Number of Zones    HP or Gas/Elec    Wire Configuration    Damper Configuration    Capacity Control    Stages   
2 - 10 Universal Daisy chain 2 Position Round or Rectangular (0.5" or 1.75" SP) Yes 3H/2C Compatible With Most Wifi Enabled Thermostats   

The perfect control system for the high end home market or very light commercial applications

IFAV

Intelligent Fresh Air Ventilator

IFAV Product Page

Damper Configuration    Operation    Run Time    Standards  
Power Open/Spring Close Time & Temperature Adjustable: 5-40 min Meets ASHRAE 62.2 and Energy Star Quality Standards

Builders around the country are using the Intelligent Fresh Air Ventilator to meet ASHRAE 62.2 and qualify for Energy Star rebates

FAV-H

Fresh Air Ventilator

& Humidity Mitigation System

FAV-H Product Page

Damper Configuration    Operation    Run Time    Standards   Dehumidify   
Power Open/Spring Close Time, Temp, & Humidity Can be Configured for 50% Run Strategy Meets ASHRAE 62.2 or IMC 430.3.2.1 Code requirement Fan Speed Control for Dehumidification

FAV – H is a microprocessor based controller that measures the temperature and humidity each minute to mitigate humidity caused by minimum fresh air requirements when the HVAC unit is not running or taxed during night operation or shoulder periods when the temperature is low

box_products
box_quote
box_training

If you need assistance please call (800) 228-2966

Or to review and discuss your job with an application engineer, please call 24/7 or fax us at (714) 898-6802